Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
IF THE BATTERY DOES NOT MOVE EASILY INTO
THE BATTERY COMPARTMENT, THE BATTERY
IS NOT INSTALLED CORRECTLY. THIS CAN
CAUSE DAMAGE TO THE PRODUCT.
3.
Make sure that the battery is installed correctly.
4.1.6
HOLD THE PRODUCT
1.
Hold the product securely with one hand on the
rear handle and the other hand on the front
handle. Always use both hands while operating
the product.
2.
Grip the handles firmly with your thumbs and
fingers wrapped around them.
3.
Ensure that the thumb of the hand holding the
front handle is positioned below the handle for a
secure grip.
4.2
START THE PRODUCT
1.
Disengage the chain brake to allow movement.
2.
Firmly press and hold the trigger lockout (1)
located on the handle.
3.
Pull the trigger (2) to activate the product's
operation.
1
English
2
4.
Once the product has started, release the trigger
lockout, allowing it to return to its initial position.
4.3
STOP THE PRODUCT
1.
Release the trigger.
2.
Push and hold the battery release button.
3.
Remove the battery from the product to fully stop
its operation.
4.4
KICKBACK
A KICKBACK CAN CAUSE SERIOUS INJURY OR
DEATH TO THE OPERATOR OR OTHERS. TO
DECREASE THE RISK YOU MUST KNOW THE
CAUSES OF KICKBACK AND HOW TO PREVENT
THEM.
• Kickback occurs when the upper quadrant of the
guide bar contacts a solid object or is pinched. The
upper quadrant of the guide bar is therefore called
the kickback zone. Kickback can occur suddenly
and can throw the product in the direction of the
operator.
• The reaction of the cutting force of the chain causes
a rotational force on the chainsaw in the direction
opposite to the chain movement. This may fling the
bar up and back in an uncontrolled arc mainly in the
plane of the bar.
11
WARNING
EN
Publicidad
