EN
1
INTRODUCTION
READ AND UNDERSTAND THE SAFETY
CHAPTER BEFORE YOU ASSEMBLE THE
PRODUCT.
1.1
PRODUCT DESCRIPTION
This product is a battery-operated chainsaw with an
electrical motor.
We are committed to continuously improving our
products, and reserve the right to modify the design
and appearance without prior notice.
1.2
INTENDED USE
This product is designed for cutting branches, trunks,
logs and beams of a diameter determined by the
cutting length of the guide bar. It is only designed to
cut wood.
1.3
PRODUCT OVERVIEW
11
10 9
12
Guide bar cover
1
Front hand
2
guard / chain
brake
Front handle
3
Trigger lockout
4
Trigger
5
Oil cap
6
Oil window
7
Spiked bumper
8
WARNING
2
1
3
8
6
7
14 13 15
Saw chain
9
Guide bar
10
Wrench
11
Rear handle
12
Chain tensioning
13
screw
Sprocket cover
14
Bar nut
15
English
1.4
SYMBOLS ON THE PRODUCT
Symbol
Note: Other symbols/decals on the product refer to
certification requirements.
1.5
CALIFORNIA PROPOSITION 65
THIS PRODUCT CONTAINS OR EMITS A
CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER OR BIRTH
DEFECTS OR OTHER REPRODUCTIVE HARM.
2
SAFETY
2.1
SAFETY DEFINITIONS
Warnings, cautions, and notes are used to point out
especially important parts of the manual.
THERE IS A RISK OF INJURY OR DEATH
FOR THE OPERATOR OR BYSTANDERS IF THE
INSTRUCTIONS IN THE MANUAL ARE NOT
OBEYED.
4
Explanation
Direct current - Type or charac-
teristic of current.
Important Safety Precautions.
Carefully read and understand all
instructions before operating the
product, and follow all warnings
and safety instructions.
Always wear safety glasses with
side shields marked to comply
with ANSI Z87.1 and hearing pro-
tection marked to comply with
ANSI S3.19 when operating this
product.
Do not expose the product to rain
or moist conditions.
Always operate product with both
hands.
DANGER! Be careful with kick-
backs.
Keep all bystanders at least 50
feet (15 m) away.
WARNING
WARNING