Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6
TRANSPORTATION, STORAGE, AND
DISPOSAL
6.1
TRANSPORTATION AND STORAGE
• Follow special packaging and labeling requirements
for commercial transportation, including by third
parties and forwarding agents.
• Seek advice from a person with special training in
dangerous materials before shipping the product
and comply with all applicable national regulations.
• Use tape on open contacts when packaging the
battery and ensure it is securely packed to prevent
movement.
• Remove the battery before storing or transporting
the product.
• Store the battery and battery charger in a dry,
moisture-free, and frost-free space.
• Avoid storing the battery in an area where static
electricity may occur, and do not store in a metal
box.
• Charge the battery 30% to 50% before long-term
storage.
• Store the battery charger in a closed and dry space.
• Keep the battery away from the battery charger
during storage, and ensure that unauthorized
persons, including children, do not touch the
equipment. Store the equipment in a lockable
space.
• Clean the product and perform full servicing before
long-term storage.
• Use transportation guards on the product to prevent
injury or damage during transportation and storage.
• Securely stow the product during transport to ensure
safe handling.
6.2
DISPOSAL OF THE BATTERY, BATTERY
CHARGER, AND PRODUCT
Symbols on the product or the package of the product
mean that the product is not domestic waste. Recycle
it at a recycling station for electrical and electronic
equipment. This helps to prevent damage to the
environment and persons.
Get in touch with your local authorities, domestic waste
service, or your dealer for more information about how
to recycle your product.
7
TROUBLESHOOTING
Problem
The guide bar
and the chain
become hot and
release smoke.
Possible cause Solution
The chain is too
Adjust the chain
tight.
tension.
The oil tank is
Add oil.
empty.
English
Problem
The motor runs
but the chain
does not rotate.
The motor runs
and the chain
rotates, but the
18
Possible cause Solution
Remove the
Contamination
causes a block-
guide bar and
age of the dis-
clean the dis-
charge port.
charge port.
Contamination
Clean the oil
causes a block-
tank. Add new
age of the oil
oil.
tank.
Contamination
Clean the guide
causes a block-
bar and the oil
age of the guide
tank cap.
bar and the oil
tank cap.
Contamination
Clean the
causes a block-
sprocket and
age of the
the guide
sprocket or
wheels.
guide wheels.
The chain is too
Adjust the chain
tight.
tension.
The guide bar
Replace the
and the chain
guide bar and
are damaged.
the chain.
1.
Remove
the battery
pack from
the ma-
chine.
2.
Remove
the guide
bar cover.
3.
Remove
the bar
and saw
chain.
The motor is
4.
Clean the
damaged.
machine.
5.
Install bat-
tery pack
and oper-
ate the
machine.
If the sprocket
rotates, it
means the mo-
tor works prop-
erly. If not, call
service center.
Sharpen or re-
The chain is
place the saw
blunt.
chain.
Publicidad
