Publicidad
Idiomas disponibles
Idiomas disponibles
A
23. Stand the assembled unit upright, then fully slide the assembled File Drawer into the frame as shown.
24. To insert the assembled File Drawer into the lower frame first. Extend the Ball Bearing Slide Tracks on
the frames all the way forward (including ball bearing cart). Then align the Slide Runners on the
assembled File Drawer with the Slide Tracks and push the drawer carefully inside until it stops.
25. Repeat the same process to install the assembled Utility Drawer into the top frame.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously pushes the plastic release
lever of the ball bearing slides up on one side and down on the other side, and then pull it completely out.
Letter size file folders hang directly on the guide
rails (Q). Arrange from front to back to maximize
cabinet space.
26. Firmly hook the hanging file folders onto the two File Hangers (R) / Guide Rails (Q) installed.
Assembly Instructions
C
B
G
L
Legal size file folders hang on the file hangers (R).
Slide file hangers forward or backward to adjust
size according to your folder dimensions. Arrange
from side to side to maximize cabinet space.
15
Drawer Installation
FRONT
Ball bearing cart
Ball bearing cart
FRONT
Publicidad
