Publicidad
Idiomas disponibles
Idiomas disponibles
4. Slide the Utility Drawer Bottom Panel (K) into the grooves on the Utility Drawer Side Panels (I and J)
until fully inserted into the Utility Drawer Front Panel (G).
J
5. Position the Utility Drawer Back Panel (H) to the Upper Side Panels (I and J). Make sure that the Drawer
Bottom Panel (K) fits securely into the groove of the Utility Drawer Back Panel (H).
6. Fasten the Utility Drawer Back Panel (H) between the Utility Drawer Sides (I and J) with four 38 mm
Pan Head Screws (4). Tighten the screws with a Phillips screwdriver.
Drawer Assembling
J
H
I
K
K
I
G
4
H
J
K
7
I
Publicidad
