Publicidad
Idiomas disponibles
Idiomas disponibles
Attention!
Mandatory
operations
Please do not bend, twist, or damage the water supply hose. Otherwise, it may
cause leakage.
Stop use of the product, if it is defective. Press power reset button, turn off the
power, and close the water supply valve in the following cases:
- excessive heat, smoke;
- abnormal sound and smell;
- the product is damaged or cracked;
- the product is blocked.
Using a defective product may result in electric shock, personal injury, fire or
leakage in the room.
Do not use any polishes, gasoline, detergents, hard brushes or other aggressive
cleaning agents to clean the product lid or other plastic parts. This may cause a
chemical reaction or crack.
Do not move the seat or lid. The product may fall and result in personal injury.
During a thunderstorm, it is strongly recommended to cut the device off.
During installation, repair, disassembly and cleaning of the product, cut off
power and water supply.
This product should be used at voltage 220V-240V, 50/60Hz, and current not
less than 10A. The mains plug shall be provided with an earthing switch or
protection against current leakage, or a similar high-sensitivity switch (normal
current sensitivity up to 10mA).
Provide ventilation equipment in the bathroom to prevent moisture. Do not
install in rooms with high humidity or risk of wetting the product. Otherwise, it
may result in electric shock or fire.
In case of any water leakage, close the water supply valve and call for service.
Insert the seat lid into the quick-release console on the front. Gently pull the seat
lid and make sure the lid is installed securely. Following the instructions will help
prevent injury and ensure proper operation of the product.
Disconnect power to the product before removing the lid.
Safety precautions
23
Publicidad
