Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions on the use of the main device
The electronic e-bidet is provided with a night backlight. It turns on automatically
using a light sensor.
36
STOP - press the button to disable all functions.
Washing the rear part of the body. Press the button, the function will turn on after
a beep.
Automatic shutdown will occur after 2 minutes or, turn the function off pressing
STOP button.
The function will stop working immediately if the user leaves.
Washing the front part of the body. Press the button, the function will turn on after
a beep.
Automatic shutdown will occur after 2 minutes or, turn the function off pressing
STOP button.
The function will stop working immediately if the user leaves.
Massage. Press the button in the mode of washing the rear part of the body/
washing the front part of the body, the function will turn on after a beep.
Water temperature setting
In washing mode, the intial setting is at level 3. Press "+" button yo increase water
temperature, and "-" button to decrease the temperature. There are 5 levels of
water heating and the indicator light will be on under the appropriate level.
Nozzle position setting
In rear wash or front wash mode, the initial setting is at level 3. Press "+" button to
push the nozzle forward, and "-" button to move the nozzle backward. There are
5 degrees of nozzle position and the indicator light will be on below the appropri-
ate level.
Water flow setting
In washing mode, press "+" button to increase water flow, and "-" button
to decrease water flow. There are 5 levels of water flow and the indicator light will
be on below the appropriate level.
Setting of the seat heating temperature
Press "+" button to increase the seat temperature and "-" button to reduce the
seat temperature. There are 3 degrees of seat temperature and the indicator light
will be on under the appropriate level.
A. Seat heating function is disabled by default when power is connected.
B. Press SEAT "+" button on the remote control panel and indicator will light on it,
it means that the seat heating function is on. If the power is connected and seat
heating has been activated, the seat temperature is maintained at the set level.
C. Keep pressing SEAT "-" button on the remote control panel until the indicator
goes off, which means that the seat heating function is off.
Publicidad
