Publicidad
Idiomas disponibles
Idiomas disponibles
Remote control panel
Method 2
1. Make 2 holes with ø6mm drill in the wall vertically at a distance of 46 mm-52 mm
and a depth of 22 mm.
Note: make sure that the user can reach the remote control panel manually, while sitting on the seat.
2. After installing the anchor in the wall, align the mounting hole of the remote control
panel and tighten the screw. Set the holder fixing the panel with a magnet and fix
tightly.
Note: pay attention to the polarity when installing the magnet, fig.2.
3. Place the remote control on the holder after installing the battery, and the panel
will be locked onto the holder.
Note: Please leave the remote control panel in the holder when not in use to avoid falling.
1. The remote control panel may break after falling.
2. Avoid ingress of the water on the remote control panel or its falling into the water, this will damage the
remote control panel.
1
2
34
2
4
1
3
2
Ø6
magnet
Publicidad
