Hitachi GP 2 Manual De Instrucciones página 11

6. Installing a wheel
WARNING:
(a) Dimension should always be less than 1/2" (13 mm). Longer lengths can
result in excess vibration, wheel breakage, and the chance for serious injury.
(b) When dimension d is 1/4" (6.35 mm), the diameter of the wheel (dimension
D) should be less than 1" (25 mm). NEVER use a longer diameter wheel.
(c) When dimension d is 1/8" (3.175 mm), the diameter of the wheel (dimension
D) should be less than 3/8" (10 mm).
(d) Dimension L varies according to the dimension D. Dimension L can be longer
as dimension D increase. Refer to the following table:
d
3/16''
D
(5mm)
1/2''
L
(13mm) (20mm)
USING A WRONG SIZED WHEEL CAN CAUSE WHEEL
BREAKAGE AND RESULTING SERIOUS INJURY.
In order to avoid this hazard, refer to the following illustration
to determine the proper dimensions(s) of your wheel. Some
guidelines:
1/8''(3.175mm)
1/4'' 5/16''
(6mm) (8mm) (10mm)
3/4'' 3/4''
(20mm) (20mm)
3/8'' 1/2''
(13mm) (16mm)
3/4'' 1-1/2''
(38mm) (25mm)
Tapered portion
Collet chuck
Fig. 2
(When =1/2''(13mm))
1/4''(6.35mm)
5/8'' 3/4''
(20mm) (25mm)
1'' 1'' 3/4''
(25mm) (20mm)
English
1''
11