Descargar Imprimir esta página

LoadLok FreightLok Kargo Keeper Manual De Usuario página 10

Barra

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
PRODUCT USER MANUAL
FREIGHTLOK KARGO KEEPER
6.2.3
Pull out the innertube and stop ca. 2cm before you touch
2cm
the roof. (the remaining 2cm + pressure will be generated
by closing the handle).
6.2.4
Version 1 Round Kargo Keeper with reck:
Close the handle now completely till it is fixed at the
trigger. Pay attention to not clamp you hand between the
handle and the Kargo Keeper.
Version 1
Version 2 Silver Square Kargo Keeper with button:
Close the handle now completely and make sure the pin
at the handle will be locked in into the innertube.
Version 3 Orange Square Kargo Keeper with button:
Close the handle now completely. Make sure the button is
fully locked in, you should be able to clearly see the
button coming out of the outside tube.
Version 2
Version 3
Version 3
6.2.5
Make sure the pressure of the Kargo Keeper is high
enough, it should stay strong between floor and roof and
should not be moveable anymore. Do not clamp it too
strong, otherwise you damage the roof of your vehicle.
Do not place goods in front of the Kargo Keeper handle.
Only place it at the backside of the Kargo Keeper.
Place the Kargo Keeper as close as possible to the goods.
Some Kargo Keeper have flatten foots on one side to be
closer to the goods.
10

Publicidad

loading

Productos relacionados para LoadLok FreightLok Kargo Keeper