Publicidad
Idiomas disponibles
Idiomas disponibles
7. Starter rope handle
8. Starter housing
9. Vibration damping system, 3 units
10. Chain oil tank
11. Muffler
12. Chain brake and front hand guard
13. Start/stop switch
14. Choke control
15. Air purge bulb
16. Clutch cover
17. Chain tensioning screw
18. Brake band
19. Chain catcher
20. Spiked bumper
21. Saw chain
22. Guide bar
23. Bar tip sprocket
24. Transport guard
25. Operator's manual
26. Combination wrench
27. Top handle
28. Rope eyelet
29. Information and warning decal
30. Carburetor adjustment screws
31. Product and serial number plate
32. Oil pump adjustment screw
33. Front handle
34. Bar nut
35. Screwdriver
Symbols on the product
Careless or incorrect use of this product can
result in serious or fatal injury to the operator
or others.
Read the operator's manual carefully and
make sure you understand the instructions
before you use this product.
Always wear approved protective helmet,
approved hearing protection and protective
goggles or a visor.
Both of the operator's hands must be used
to operate the chainsaw.
Never operate the chainsaw holding it with
one hand only.
995 - 004 - 05.11.2019
Never let the guide bar tip come in contact
with any object.
Warning! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Use appropriate protections for foot-leg and
hand-arm.
Chain brake, activated (right). Chain brake,
not activated (left).
Air purge.
Adjustment of the oil pump.
Refuelling.
Chain oil fill.
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle with
actuated chainbrake, CKA wb.
This chainsaw should only
be used by persons who
are specially trained in
tree maintenance work.
See operator's manual!
Working position.
Choke.
3
Publicidad
