Descargar Imprimir esta página

Chauvin Arnoux DigiFlex MA400D-1000 Manual De Instrucciones página 17

Medidor de corriente flexible

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

PRECAUTIONS FOR USE
This instrument is protected against voltages of not more than
1000V with respect to ground in measurement category III
or 600V in CAT IV between the sensor and the conductor of
which it measures the current.
The protection provided by the instrument may be impaired
if the instrument is used other than as specified by the
manufacturer.
■ Do not exceed the rated maximum voltage and current or
the measurement category.
■ Observe the conditions of use, namely the temperature,
the relative humidity, the altitude, the level of pollution,
and the place.
■ Before each use, check the integrity of the insulation
on the coil, the cords and the housing. Do not use the
instrument if it is open, damaged, or poorly reassembled,
or its accessories if they appear damaged.
■ The sensor must not be applied to or removed from
uninsulated conductors at dangerous voltages.
■ Use personal protection equipment systematically.
■ All troubleshooting and metrological checks must be per-
formed by competent and accredited personnel.
1. PRESENTATION .......................................................18
2. CURRENT MEASUREMENT ...................................20
2.1. Measurement principle ...................................20
2.2. Use .................................................................20
3. CHARACTERISTICS ................................................23
3.1. Reference conditions......................................23
3.2. Electrical characteristics .................................23
3.3. Variations in range of use ...............................24
3.4. Typical frequency response curves ................24
3.5. Power supply ..................................................25
3.8. Environmental conditions ...............................25
3.7. Characteristics of construction .......................26
3.8. Compliance with international standards........26
3.9. Electromagnetic compatibility .........................26
4. MAINTENANCE .........................................................26
4.1. Cleaning .........................................................26
4.2. Replacement of the batteries .........................27
5. WARRANTY ...............................................................27
6. DELIVERY CONDITION ...........................................28
6.1. Accessories ....................................................28
6.2. Replacement parts .........................................28
CONTENTS
17

Publicidad

loading