Philips baristina BAR300 Manual Del Usuario página 20

English
22
Troubleshooting
Problem
The portafilter cannot be moved to
the right to start grinding coffee.
The portafilter is stuck in the
grinding position on the right.
The Espresso or Lungo button keeps
blinking slowly and the machine
does not heat up.
The machine does not start grinding
the beans. The Espresso or Lungo
button keeps blinking slowly after
the portafilter is moved to the right
to start grinding.
The machine does not start brewing
coffee. The Espresso or Lungo
button keeps blinking fast after
grinding.
The portafilter cannot be removed
or pulled from the machine.
Possible cause
The machine safety is activated to not
brew a new coffee when there is still
an old coffee puck inside the
portafilter.
The plug was removed from the
machine while the portafilter was in
the grinding position.
As soon as a drink button is selected,
the button will start to blink slowly to
indicate the direct start function is
activated. The machine is heating up
and the next step can already be
made.
The portafilter was not inserted
completely while moving it to the
right, or the portafilter got out of
place while moving the portafilter to
the right.
The portafilter is out of place after it is
automatically moved back to the
brewing position.
The water container is removed from
the machine during grinding or not
well placed onto the machine.
The machine is still brewing coffee.
The coffee brewing, rinsing,
programming or descaling process
has been interrupted.
Solution
Remove the portafilter and
empty it, rinse it if needed
and place it back into the
machine. Always make sure
the portafilter is empty
before starting a new brew.
Move the portafilter back to
the starting position
manually.
You do not have to wait.
Move the portafilter handle
to the right to start the
grinding and brewing
process.
Give the portafilter handle a
little push to connect it well
into the machine. The
machine will start to grind
the beans. Always make sure
you insert the portafilter into
the machine fully, until you
hear a click.
Give the portafilter handle a
little push to connect it well
into the machine. The
machine will start to brew
coffee.
Make sure you place back the
water container and push it
into the housing of the
machine until it clicks into
place.
As long as the brewing
process is ongoing and the
selected drink led is blinking
slowly, the portafilter cannot
be removed from the
machine.
If a process is interrupted, the
machine needs some time to
return to starting position.
During this process, the
portafilter cannot be
removed until all leds are off.