DEVICE DESCRIPTION
1.
Drip tray
2.
Drip tray cover
3.
Internal drip tray
4.
Grounds container
5.
Brewer
6.
Service doors
7.
Adjustable coffee dispenser
8.
Control panel
9.
Grinding level adjustment knob
10. Upper grinder burr
11. Bottom grinder burr
CONTROL PANEL DESCRIPTION
a.
Power switch
b.
Milk frothing
c.
No coffee beans
d.
Low water level / No water tank
e.
Brewer cleaning indicator
f.
Warning indicator
g.
Grounds container is full
h.
Cleaning
BEFORE FIRST USE
Remove the coffee maker from the box; remove all stickers, transport protectors, bags
and fillers. Check whether all accessories are complete and the device is not damaged.
Check all accessories and their functions. It is recommended to keep the original packag-
ing for use in the future. Then, carry out the following activities.
1. Before first use, remove the water tank, milk container, brewer and milk frother, then rinse them
with clean water and wipe them dry.
2. Check and make sure that all removable parts are securely fitted:
Water tank:
- Fill the water tank with fresh water up to the Max mark, then refit the tank into the device and
make sure it is fitted correctly. Close the cover of the water tank
12. Coffee bean compartment
13. Coffee bean compartment lid
14. Water tank
15. Milk container - 1 set (lid, hose and
tube)
16. Milk frother
17. Coffee outlet lid
18. Power on / off switch
19. Cleaning brush
20. Dead corner of the brewer
i.
Grinder emptying
j.
Hot water
k.
Latte
l.
Cappuccino
m. Americano
n.
Double Espresso
o.
Espresso
EN
45