MPM MKW-11M Manual De Instrucciones página 49

tent of the milk is at least 3%. The amount of milk in the container should not exceed the MAX
mark on the container.
3. Insert the milk tube into the container lid.
4. Fit the hose in the container lid and then connect its other end with the milk frother.
5. Press and hold the Cappucino button
Cappucino.
6. After brewing the Cappuccino cup, the device will automatically switch to the standby mode.
7. Press and hold the Cappuccino button
function.
NOTES!
After each use, if there is still milk in the milk container it should be kept in the fridge and the
milk hose and milk frother should be cleaned immediately after use.
It is recommended to use a high cup to prevent the splashing of the foamed milk.
After the device is no longer used, carry out the cleaning process (see section: Cleaning and
maintenance).
BREWING LATTE
1. Place and appropriate cup for coffee under the
coffee outlet.
2. Fill the milk container with an appropriate
amount of cold milk.
NOTES! It is recommended that the tempera-
ture of the milk is 5-10°C and that the fat con-
tent of the milk is at least 3%. The amount of
milk in the container should not exceed the
MAX mark on the container.
3. Insert the milk tube into the container lid.
4. Fit the hose in the container lid and then connect its other end with the milk frother.
5. Press and hold the Latte button
6. After brewing the Latte cup, the device will automatically switch to the standby mode.
7. Press and hold the Latte button
function.
NOTES!
After each use, if there is still milk in the milk container it should be kept in the fridge and
the milk hose and milk frother should be cleaned immediately after use.
It is recommended to use a high cup to prevent the splashing of the foamed milk.
After the device is no longer used, carry out the cleaning process (see section: Cleaning
and maintenance)
HOT WATER PREPARATION
1. Place and appropriate cup for coffee under the
coffee outlet.
CAUTION! The cup volume should exceed
120ml.
2. Disconnect the milk container hose and close
the plug in the milk frother.
for at least 2 seconds and the device will start brewing
for at least 1 second if you wish to cancel the current
for at least 2 seconds and the device will start brewing Latte.
for at least 1 second if you wish to cancel the current
EN
49