Publicidad
Idiomas disponibles
Idiomas disponibles
3. PRODUCT ASSEMBLY
NOTE: keep the original packaging for future storage.
Figure 2 shows in more detail the parts of the fan that will facilitate its assembly.
Fig. 2 key
1.
Decorative ring
2. Circlip
3. Screw
4. Spinner
5. Blades
6. Plastic nut
7.
Motor shaft
8. Motor
9. Bracket
10. Adjustment knob
11. Tube
12. Base
13. Hook
In order to assemble the pedestal fan correctly, follow the order of the instructions below
shown in figure 3.
1.
Following the figure, locate the lower tube and remove the height-adjustment nut.
2. Extend the extensible tube and refit the height-adjustment nut.
3. Remove the hook from the lower tube and connect it to the base. Then, retighten the hook.
4. Now, the lower tube and the base will be securely fixed.
5. Locate the motor. Loosen the spinner and the plastic nut from the motor.
6. Fit the rear grille on the motor shaft. Next, tighten the plastic nut.
7.
Put the blades on the motor shaft and tighten the spinner.
8. Unscrew the screw to separate the circlip from the grilles and align the front grille with the
rear grille. After that, replace the screw and tighten it.
9. Place the motor on the extensible tube and fix it securely.
ENERGYSILENCE 790 SKYLINE CONTROL
ENGLISH
39
Publicidad
