cecotec ENERGYSILENCE 560 MAX SMART Manual De Instrucciones página 41

1 Timer button: the timer can be set in a range of 1-12 hours.
2 Speed button: 3 speeds are available.
3 Power button
4 Oscillation button
5 Modes button: Normal, Natural and Sleep.
To operate the remote control, follow the steps below:
1. Be sure to point the remote control towards the receiver on the control panel.
2. Use the remote control within 5 metres of the receiver. If you do not direct the remote
control at that distance to the receiver, it will not work effectively.
3. Do not place any obstacles between the receiver and the remote control.
4. Handle the remote control with care. If you hit it or drop it on the ground, it will lose
effectiveness.
5. Store it in a safe place when not in use.
6. Remove the battery from the remote control before storing it.
Replacing the remote-control battery
Fig. 6.
1. Press the battery compartment to open and remove it.
2. Place the CR2025 battery in the compartment. Pay close attention to polarity.
3. Put the compartment back in place and close it tightly.
5. CLEANING AND MAINTENANCE
WARNING!
AL YS UNPLUG THE FAN BEFORE MOVING IT.
WA
- Do not immerse the appliance or its power cord in water.
- Do not use detergents, thinners, petrol, or benzene to clean the fan.
- Unplug the appliance from the mains and wait for it to come to a complete stop before
cleaning.
- Use a soft, damp cloth to clean the surface of the fan.
ENERGYSILENCE 790 SKYLINE CONTROL
ENGLISH
41