Basic instrument
Make sure that the battery is sufficiently charged before use. To charge the battery, refer to
the
battery.
Refer to the help screen for more information.
To update or change the basic instrument setup:
1
Push the MENU button.
2
Navigate to the Communication Setup.
3
Push the UP or DOWN ARROW and navigate to General Setup, then push the SELECT button.
4
Update or change the options. Default values appear in parentheses.
Option
Backlight Timeout
Backlight Contrast
Language
Security
Change Password
Feedback Volume
System Date
System Time
Data display setup
Change the settings for how the instrument shows and stores data in the Data Display Setup screen.
Different models of the instrument can have different settings and parameters. Refer to
DOC026.97.80271, Edition 9
HHPC 6+, HHPC 3+, HHPC 2+ USER MANUAL
Description
5 -300 seconds (30). 0 disables the feature.
(High), Medium, Low
English, Japanese
This feature is checkbox controlled. A change to this setting becomes
active when the user exits the General Setup screen.
If the Security feature is set to on (the box is checked), a user must
select the Sign On icon and put in the current administrator password
to get Administrator level access. If the feature is on but no password is
put in, the user has only Operator level access.
If the Security feature is set to off (the box is not checked), a user has
both Operator and Administrator level access.
The default password is 123456. If a user forgets the password,
technical support can supply a temporary password. The user must give
the instrument serial number and system date for a temporary
password to be generated.
(Intermediate). This setting can be adjusted up or down.
mm/dd/yyyy, dd/mm/yyyy, yyyy/mm/dd
12 or 24 hour format
Operation
Charge
Table
1.
13 / 26