Descargar Imprimir esta página

hillvert HT-HBC-500 Manual De Instrucciones página 22

Desbrozadora para matorrales
Ocultar thumbs Ver también para HT-HBC-500:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 89
The use of appropriate, approved personal protective equipment reduces the
risk of injury.
f)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
g)
Do not overestimate your capabilities. Maintain body balance and equilibrium
at all times during operation. This allows for better control of the machine in
unexpected situations.
h)
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away
from moving parts. Loose clothing, jewelry, or long hair can be caught in
moving parts.
i)
Eye, ear, and respiratory protection is recommended.
j)
The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.
k)
Do not place your hands or any objects inside the running appliance!
2.3.
Safe use of the unit
a)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
b)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
c)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
d)
Keep the unit out of the reach of children.
e)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
f)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
g)
Avoid situations in which the machine stops under heavy loads during
operation. This can cause overheating of the drive elements and consequent
damage to the equipment.
h)
Do not touch any moving parts or accessories unless the unit is unplugged.
i)
Do not leave the unit switched on unattended.
j)
Clean the unit regularly to prevent permanent dirt build-up.
k)
The value of vibration emission may change if the unit is used under different
environmental conditions.
l)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
EN

Publicidad

loading