Publicidad
Idiomas disponibles
Idiomas disponibles
m) Do not tamper with the unit to alter its performance or design.
n)
Keep the unit away from sources of fire and heat.
o)
Avoid working with wet or very tall grass and bushes.
p)
Do not use the unit in enclosed spaces or buildings!
q)
Do not operate the unit on slippery ground, at night, during fog,
thunderstorms, strong winds or other difficult weather conditions that prevent
clear
r)
Before starting work, make sure there are no bystanders, animals, or objects
in the vicinity that could become obstructions during operation.
s)
Before operating, make sure the unit has been properly assembled and is
undamaged.
Do
not
t)
Some screws may loosen as a result of the vibration generated by the machine
during
Check their condition and tighten them before each use.
u)
The machine is not designed to cut material other than brush.
v)
To start work in another location, first turn off the unit and then move it to its
destination
w)
Do not make any adjustments while the engine is still running.
x)
If the machine encounters an obstacle during operation, switch it off
immediately.
y)
If the blade becomes jammed, do not straighten it by hand!
z)
Take regular breaks during operation. Prolonged exposure to noise and
exhaust fumes can damage your health.
aa) It is advisable to use the machine only when it is needed and to switch it off
during breaks to reduce the risk of damage to hearing or respiratory tract.
bb) Do not use the unit on wet areas, which would prevent the wheels from
moving.
cc) Do
not
dd) Use extreme caution when changing the direction of operation.
ee) It is not recommended to operate the unit on very steep roadsides.
Doing so may cause you to lose control of the unit.
vision
use
a
unit
paying
special
run
EN
and
that
has
attention
while
operating
visible
signs
to
the
the
balance.
of
use.
operation.
blade.
unit.
Publicidad
