Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. Hold the lower flange with a screwdriver, then use a socket wrench to loosen the nut
by turning it clockwise.
Remove the upper flange.
2. Still holding the flange, place the nylon head on the shaft and tighten by turning
counterclockwise.
BLADE INSTALLATION:
1. While holding the lower flange, loosen the nut and remove the upper flange.
2. Place the blade, disc, and top flange on the mandrel, then tighten the nut by turning
counterclockwise.
3.4. Working with the unit
3.4.1.
BEFORE STARTING:
Publicidad
