hillvert HT-HBC-500 Manual De Instrucciones página 31

3.5.1.
Maintenance schedule
Air filter
Spark plug
3.5.2.
1. After the engine has cooled, remove the spark plug using a socket wrench.
2. Clean the spark plug with a wire brush.
3. Use a feeler gauge to set the spark gap to between 0.6 and 0.7 mm.
4. Reinstall the spark plug by hand.
5. Tighten with a socket wrench.
3.5.3.
1. Remove the cover and sponge from the filter.
2. Replace the cover to prevent unwanted objects from falling into the tank.
3. Clean the air filter in warm soapy water.
4. Rinse.
5. Allow the filter to dry thoroughly.
CAUTION: Do not start the engine without the filter installed.
3.5.4.
MAINTENANCE SCHEDULE
After 12 hours of
use
Clean
Check
SPARK PLUG CLEANING:
CLEANING THE AIR FILTER:
STORAGE:
EN
After 24 hours of
use
Clean
Clean
After 36 hours of
use
Replace
Replace