VEVOR RP8626 Manual De Instrucciones página 32

3. Adjust the Pressure Control Knob (D) until a smooth and even consistency is
achieved.
4. On a scrap piece of scrap material, spray a test patch and asses the speed of
the stroke required for the pressure setting. Lower pressure will require a slower
speed, and higher pressure will require a faster stroke speed.
NOTE: The quality of the surface being painted will have a great effect on the
spraying result. The surface being painted must be properly prepared before
beginning to spray.
SPRAYING TECHNIQUE
1. Maintain about a 1-foot (30cm) distance away from the surface to be sprayed.
- 31 -