Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Fig. B
30 Release (Spool cap)
31 Spool cover
32 Line cutter
Description of functions
The battery-powered multi-trimmer has a
spool as the cutting unit.
In addition, the device is equipped with:
• Spool cutting system
• Adjustable aluminium telescopic tube
• Swivel/rotatable motor head
• Protective cover with line cutter
• Spacer
• Trimmer cart
In combination with the trimmer cart, the
battery-powered multi-trimmer can be
used as a city lawnmower.
Please refer to the following descriptions
for the function of the controls.
Technical data
Cordless Mower & Trimmer
............................... PAMT 20-Li A1
Rated voltage U ............................. 20 V ⎓
Weight with accessories ................... ≈2 kg
No-load rotation speed n
Cutting circle .............................Ø 280 mm
Spool
– Line thickness .......................... Ø 1.6 mm
– Line length ......................................... 5 m
Sound pressure level (L
...................................... 74.5 dB; K
Sound power level (L
– Measured ......... 85.5 dB; K
– Guaranteed ...................................96 dB
Vibration (a
)
h
– Handle ......... 1.563 m/s²; K < 2.5 m/s²
– Auxiliary handle
.......................... 1.419 m/s²; K < 2.5 m/s²
Battery ................................................. Li-Ion
26
−1
..... 8000 min
0
)
pA
=3 dB
pA
)
WA
=2.88 dB
WA
Temperature ................................... ≤50 °C
– Charging ................................4 – 40 °C
– Operation ......................... −20 – 50 °C
– Storage .................................. 0 – 45 °C
PARKSIDE Performance Smart battery
Smart PAPS 204 A1/Smart PAPS 208 A1
– frequency band .... 2400–2483.5 MHz
– transmitted power ................... ≤ 20 dBm
Trimmer cart
Weight ............................................≈3.3 kg
Cutting height adjustment (2-stage)
....................................................35/55 mm
Vibration (a
)
h
– Handle ......... 1.331 m/s²; K < 2.5 m/s²
– Auxiliary handle
.......................... 1.254 m/s²; K < 2.5 m/s²
Levels of noise and vibration were determ-
ined according to the standards and regu-
lations in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised
test method and can be used to compare
one power tool with another. The specified
total vibration value and the stated spe-
cified noise emission value can also be
used for a provisional assessment of the
load.
WARNING! The vibration and noise
emissions may deviate from the specified
values during actual use of the power tool,
depending on how the power tool is be-
ing used. Try to keep the exposure to vi-
brations as low as possible. An example
of a measure to reduce vibration exposure
is limiting the working hours. All parts of
the operating cycle have to be considered
while doing so (for example, times when
the power tool is switched off and times
when it is switched on but running without
any load).
Publicidad
