Hisense HBD5A Manual De Instrucciones página 51

For the universal 5L keg
1. Open the top cover of the machine, then open the tap and let the excess gas out of the nozzle
(foam may also be emitted).
2. Disconnect the tap connector from the beer dispensing unit, and press the white button first while
taking it out.
3. Then take out the beer dispensing unit and the beer keg from the machine.
4. Remove the beer dispensing unit from the empty beer keg.
6. Take a new keg of beer, reattach the beer dispensing unit and put it in the machine.
Replacing the Co2 cartridge
If there is no beer coming out when pressing (especially when you are sure there is beer in the keg),
please replace the Co2 cartridge.
1. Ensure that the tap of the machine is closed, open the top cover of the machine, unscrew the
cartridge sleeve, and remove the empty Co2 cartridge from the cartridge sleeve. Insert a new Co2
cartridge into the cartridge sleeve, and then carefully and quickly tighten the cartridge sleeve
(clockwise to tighten, counterclockwise to loosen) until a "click" sound is heard, indicating that the
cartridge sealant has been punctured and that Co2 gas can flow freely. Then turn the pressure
reducing valve assembly downwards and buckle it into the liquor outlet assembly.
2. Close the top cover of the machine.
3. Now you can prepare to use the tap to pour the beer.
Attention
1. Please use the appropriate Co2 cartridge.
The below Co2 cartridge information is for your reference. To avoid explosion, never use nitrogen gas
cartridges in the beer cooler, due to their much higher pressure.
2. New Co2 cartridges must be well maintained. To avoid a hazard, they should not be played with.
Firstly, take out the right end hook
and push the left end hook of the
handle to the side where the arrow is
pointing. Then pull out the beer
dispensing unit from the keg.
50