Hisense HBD5A Manual De Instrucciones página 52

Cleaning the beer tap mechanism
The beer cooler must conform with hygiene standards, and should be cleaned before first use or after
a long period without use. The whole machine should be cleaned with a dry cloth. Otherwise, two
cleaning steps are recommend, as follows:
1. Load warm water into the cleaning kit.
2. Connect the end of the piercing pin, press the water into the pin to clean the pin tube, and push the
water out from the beer tube at the other end. Repeat this until the beer tube is clean (at least 3 bottles
of warm water are generally required). Clean the beer tap mechanism as shown below.
Never put tap mechanism parts in the washing machine or dishwasher.
Never use a chemical cleaning detergent to clean the parts; warm or purified water is recommended.
Accessories and spare parts
1
2
3
4
5
6
7
8 Co2 cartridge
9 Cleaning bottle
Name
Connector
sealing ring
Cylinder
connector
Beer outlet
tube (short)
Beer outlet
tube (long)
Suction tube
sealing ring
Keg seal
Adaptor
Qty Installation
Pressure reducing
3
valve
Pressure reducing
2
valve
Beer outlet
2
connector
Beer outlet
2
connector
4 Suction tube
2 Standard keg
2 Heineken keg
Pressure reducing
3
valve assembly
Pressure reducing
1
valve
51
Image