YATO YT-828133 Instrucciones Originales página 18

EN
Repairs
Repair the power tool only in authorized facilities using only original spare parts. This ensures proper operation safety of the power tool
SAFETY INSTRUCTIONS FOR POWER SAWS
While working with the power saw, keep all parts of the body away from the chain. Make sure that the chain is not in con-
tact with anything before starting the power saw. A moment's distraction when working with a power saw can lead to clothes
or a body part getting entangled in the the power saw chain.
Always hold the power saw with your right hand by the back handle and with your left hand by the front handle. Holding
the power saw in the opposite way should never happen, as it increases the risk of injury.
Hold the power saw by the insulated grips only, as the chain may come into contact with a concealed wire or the power
saw's power cord. When the chain comes into contact with a live wire it may cause the metal parts to become live, leading to an
electric shock to the operator.
Wear eye protection. It is also recommended to use protective equipment for hearing, head, hands, legs and feet. Ade-
quate protective equipment will reduce personal injury by contact with waste or accidental contact with the chain.
Do not operate the power saw on a tree, ladder, from the roof or on any unstable support. Working with the power saw while
on the tree may result in injuries.
Always maintain a proper posture and work with the power saw standing on a still, safe, and level surface. A slippery or
unstable surface, e.g., a ladder, may result in a loss of balance or control of the power saw.
Exercise caution in terms of a kickback when cutting a tensioned branch. If the tension accumulated in the wood fi bres is
released, the branch may strike the operator or make them lose control of the power saw.
Take special care when cutting shrubs and saplings. Slim material can catch the chain and push the power saw towards the
operator or make them lose balance.
Handle the power saw by the front handle, turned off and away from the body. Always put on the chain guide bar guard
when transporting or storing the power saw. Correct holding of the power saw reduces the likelihood of accidental contact with
moving parts of the power saw.
Observe the instructions for lubricating, tensioning the chain, and changing accessories. An improperly tensioned or
lubricated chain can break and increase the chance of kickback towards the operator.
Keep handles dry, clean, and free of grease and oil. The greasy or grease-coated handles are slippery and cause control loss
of the power saw.
Cut wood only. The use of the power saw for other purposes than that intended is not allowed. For example: do not cut
plastic, concrete, or non-wooden construction materials. Using the power saw for works other than that intended may result
in dangerous situations.
This power saw is not designed to fell trees. Using the power saw for other work than the intended may cause serious injuries
to the operator and bystanders.
Observe all instructions when removing jammed material, storing or servicing the power saw. Make sure that the power
switch is in the off position and that the battery is disconnected from the tool. Unexpected start-up of the power saw when
removing jammed material or servicing may result in serious injuries.
Causes and prevention of kickback towards the operator.
A kickback towards the operator may occur when the guide bar's end is in contact with an object or the cut wood jams the power
saw in the kerf. In some cases, contact between the end of the guide bar and an object can cause a violent reaction driving
the guide bar up and towards the operator. Jam in the guide bar upper edge kerf can suddenly point the guide bar towards the
operator.
These reactions can result in a loss of control of the power saw, leading to serious injuries. Do not rely only on safety elements built
into the power saw. The power saw operator should take some steps to prevent accidents and injuries during work.
A kickback towards the operator is the result of improper use or incorrect operating procedures or conditions. This can be avoided
by taking the appropriate precautions listed below:
Keep a fi rm grip of both hands with thumbs and fi ngers closing around the power saw handles. The position of the body
and shoulders should allow withstanding forces arising during the kickback. If appropriate precautions are taken, the kick-
back forces can be controlled by the operator. Do not allow the power saw to move freely.
Do not reach too far and cut above shoulder height. This will help prevent unintentional contact with the end of the guide bar
and allow better control of the power saw in unexpected situations.
Use guide bar and chain replacements only as specifi ed by the manufacturer. Incorrect replacement of the guide bar and
chain may cause chain breakage or kickback.
Observe the instructions given by the manufacturer regarding the chain sharpening and maintenance. Reducing the depth
of the chain guide bar groove can lead to an increased probability of kickback.
Other safety instructions
It is forbidden to expose the power saw to precipitation and use it in an atmosphere of increased humidity. It is also forbidden to
use the power saw in an atmosphere with an increased risk of fi re or explosion.
O R I G I N A L I N S T R U C T I O N S
18