SMA Sunny Boy Storage 3.8-US Instrucciones De Instalación página 63

SMA Solar Technology AG
☐ A smart device (e.g. smartphone, tablet or laptop) must be available.
☐ The smart device must be in the same local network as the product.
☐ The respective latest version of one of the following web browsers must be installed on the
smart device: Chrome, Edge, Firefox or Safari.
☐ The installer's SMA Grid Guard code must be available to change network-relevant settings
after the first 10 hours of feed-in operation, or after completing the installation assistant. You
can request the SMA Grid Guard code via the Online Service Center.
Importing and exporting files with smart devices having an iOS operating
system is not possible
For technical reasons, importing and exporting files (e.g., importing an inverter configuration,
saving the current inverter configuration or exporting events and parameters) is not possible
with smart devices having an iOS operating system.
• Use a smart device that does not have an iOS operating system for importing and
exporting files.
Procedure:
• Enter the IP address of the product in the address bar of the web browser.
☑ The login page of the user interface opens.
7.4 Logging Into the User Interface
After a connection to the user interface of the inverter has been established, the login page opens.
Log onto the user interface as described below.
Installer password for inverters registered in a System Manager or in
Sunny Portal
To be able to register the inverter in a System Manager (e.g. SMA Data Manager) or in a
Sunny Portal system, the password for the user group Installer must match the system
password. If you assign a password for the user group Installer via the user interface of the
inverter, the same password must also be used as the system password.
• Assign a uniform installer password to all SMA devices in the system.
Procedure:
1. In the drop-down list Language, select the desired language.
2. In the Password field, enter a password for the User user group.
3. In the Repeat password field, enter the password again.
4. Click on Save.
5. In the New password field, enter a password for the Installer user group. Assign a uniform
password to all SMA devices to be registered in a system. The installer password is also the
system password.
6. In the Repeat password field, enter the password again.
7. Click on Save and log in.
☑ The Configuring the Inverter page opens.
Installation Manual
7 Commissioning
SBSxx-US-10-IA-xx-14 63