Publicidad
Idiomas disponibles
Idiomas disponibles
Always wear resistant shoes with non-slip sole that
completely covers the foot. Never work barefoot or wearing
sandals, for example.
When carrying out maintenance and cleaning work,
changing accessories and transporting the wood shredder,
always wear tight-fit gloves.
Do not wear loose clothing or jewelry. Clothing worn during
the machine operation must be adequate, tight and closed,
for example, a work boiler suit. Do not wear scarves, ties,
necklaces or other similar tight-fit clothing.
Keep hair, clothing and gloves away from moving parts. The
rotating parts can touch or drag the hair or clothes,
resulting in serious injury.
Do not transport the wood shredder while the combustion
engine is running. Before moving it, stop the engine, wait
for the blades to stop completely and remove the spark
plug cap.
Always transport the equipment when the engine is cold
and without fuel.
The wood shredder should always be moved by two people.
Use loading ramps, lifting devices.
For safety reasons, it is not permitted to exceed an angle of
inclination of 15° during transport and loading, especially
when using loading ramps.
Protect the wood shredder and its parts carried with straps,
cables, etc. Never transport the wood shredder with loose
parts.
Carry the machine with a suitable trailer or on a suitable
loading surface, and not in the passenger compartment
(e.g. trunk) of a vehicle.
When transporting the machine, in force regional
legislation must be respected, in particular that concerning
the load being transported and the transport of objects on
loading surfaces.
Make sure that the wood shredder is only used by people
who are familiar with the instruction manual.
Before starting the engine, check that the fuel system
is properly sealed, in particular the tank cap and hose
connectors. In the event of a leak or damage, do not start
the combustion engine. Ask for technical assistance from
an official dealer.
Before operating the wood shredder, replace damaged and
worn-out parts.
Check that all nuts and bolts are properly tightened. It is
important to inspect regularly the equipment in order to
ensure safety issues and a good performance.
Before operating the machine, check that the spark plug is
properly connected to the spark plug cap.
Before start-up, to ensure you work safely with the wood
shredder, you need to check if:
▪ The wood shredder is correctly assembled and that the
blades are correctly and securely fixed;
▪ The safety devices are in perfect condition and working
correctly. Never operate the machine if the safety devices
are missing, damaged or worn out;
▪ The tank, fuel line components and cap are in perfect
condition;
▪ The oil sump cap is properly tightened.
Make all adjustments and work necessary. If you have
any questions or difficulties, contact your official
dealer.
Before start up, remove all objects on top of the machine
(tools, accessories, cloths, etc.).
Observe the local regulations on the hours when it is
allowed to operate combustion-engine machines and the
permitted noise level.
Publicidad
