03/10/23 11:14:36 32KPF600_078
Wear inspection:
Check the chain wear label when adjusting
the chain. If the red zone ( ) on the label
aligns with the rear edge of the axle washer
( ) after the chain has been adjusted to the
7
proper slack, the chain is excessively worn
and must be replaced. The proper slack is:
15 25 mm (0.6 1.0 in)
−
−
Replacement Chain:
D.I.D 520 106 LE
72
6
(6) Red zone
(7) Rear edge of the axle washer
(6)
(7)