Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL REQUIREMENTS
n A 220–240 volt, 50 Hz., AC-only, 10-amp, fused electric
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
n After installation, access to mains plug or disconnection from
mains supply via a double-pole switch must be ensured at all
times in order to ensure immediate deactivation of the washer
in case of emergency.
n This washer is equipped with a power supply cord having an
earthing plug. The plug should be accessible for disconnection
from the supply.
n If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons
in order to avoid a hazard.
14
EARTHING INSTRUCTIONS
This washer must be earthed. In the event of a malfunction
or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-earthing conductor and an earthing plug. The
plug must be plugged into an appropriate outlet that is
properly installed and earthed in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
earthing conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance – if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
Using the universal cord included with this washer:
This washer is equipped with a universal cord with
interchangeable plugs.
1. To use the universal cord, select the plug end that fits
your electrical outlet, and plug it into the adapter on
the supply cord.
2. Secure the plug end in place on the cord by aligning the
2 cover halves over the cord adapter and clipping them
together.
Publicidad
Tabla de contenido
