Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
COMPLETE INSTALLATION
q
Check electrical requirements. Be sure that you have the
correct electrical supply and the recommended earthing
method.
INSTALLING COIN SLIDE AND COIN BOX
The coin slide mechanism, service door lock and key, and coin
box lock and key are not included with some models but can
be obtained from the usual industry sources.
Remove the service door of the meter case by lifting it up
at the back. Install the money-accepting device. (Refer to
manufacturer's instructions for proper installation.)
An earthing connection is needed for the coin slide, which
can be made by connecting the available harness (W10846503)
to the coin slide.
q
Check that all parts are now installed. If there is an extra part,
go back through steps to see what was skipped.
q
Check that you have all of your tools.
q
Check that shipping materials were completely removed
from washer.
q
Dispose of/recycle all packaging materials.
q
Check that the water faucets are on.
q
Check for leaks around faucets and inlet hoses.
q
Remove film from console and any tape remaining on
washer.
q
Plug into an earthed outlet or connect power.
q
Check that circuit breaker is not tripped or fuse is not blown.
q
Start washer using the payment system (if available) to
check that the wash cycle completes without an error code
or water leak.
Install a lock and cam on the meter case service door. Install
the coin vault with lock and key in the meter case opening.
For Free Vend, an OPL kit can be purchased from Whirlpool.
Whirlpool part number W10222023.
Earthing
connection
15
Publicidad
Tabla de contenido
