Vacuum Cleaning - SEVERIN BC 7049 Manual De Instrucciones

V
acuum cleaning

3 Vacuum cleaning

Installation or replacement of accessories
Only install device parts when the power plug has been disconnected from the socket.
ˆ
Only use undamaged nozzles. Damaged nozzles can scratch surfaces.
ˆ
For additional installation tips, see  Quick Start Guide  Installation.
When vacuuming
Make sure that you are always over the device, especially when vacuuming stairs. Otherwise the device
ˆ
may fall down and cause injuries.
Only use the device with a dust bag and the filters.
ˆ
Follow the cleaning and maintenance instructions of the floor covering, carpet or furniture manufacturer!
ˆ
Never pull out the connection cable beyond yellow marking. If the blue marking is visible, press the cable
ˆ
rewind button to retract the connection cable to the yellow marking. Otherwise, the connection cable may be
overstrained and damaged.
Light on the power regulator lights up green: The device is switched on and the filters are clean.
ˆ
1
20
When retracting the connection cable, hold the power plug in your
ˆ
hand and guide it in the winding direction. Otherwise the connection cable
may lurch, injure persons nearby, become a trip hazard or pull over objects.
Always ensure that the nozzle suitable for the surface is in place and
ˆ
the correct suction power is set.
If an object has accidentally been suctioned up, quickly actuate the
ˆ
bypass vent on the handle (Fig. 1) to reduce the suction power.
For additional tips on operation, see  Quick Start Guide  Operation.