Conventions Used In This Manual; Precautions For Placement And Use; Cleaning The Unit; Beware Of Condensation - Tascam DR-10X Manual Del Usuario

Conventions used in this
manual
The following conventions are used in this manual.
•
When we refer to buttons, connectors and other
parts of this unit and other equipment, we use a
bold font like this: MENU button.
•
When we show messages, for example, that
appears on the unit's display, the typeface looks
like this: .
ON
•
The area of the display that is shown in inverse
(light on dark) is referred to as the cursor or as
being highlighted.
•
"microSD/microSDHC memory card" is sometimes
abbreviated as "microSD card".
•
Additional information is provided as necessary as
tips, notes and cautions.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and
describe special cases.
CAUTION
Failure to follow these instructions could
result in injury, damage to equipment or lost
recording data, for example.
8
TASCAM DR-10X
Precautions for placement
and use
•
The operating temperature range of this unit is
0–40 °C.
•
Do not install this unit in the following types of
locations. Doing so could degrade the sound
quality and/or cause malfunctions.
Places with significant vibrations
Near windows or other places exposed to
direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
Places exposed directly to rain or other water
•
Do not place this unit on top of a power amplifier
or other device that generates heat.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not
wipe with chemical cleaning cloths, thinner, alcohol
or other chemical agents. Doing so could damage
the surface or cause discoloration.

Beware of condensation

If the unit is moved from a cold to a warm place,
or used after a sudden temperature change, there
is a danger of condensation; vapor in the air could
condense on the internal mechanism, making
correct operation impossible. To prevent this, or if
this occurs, let the unit sit for one or two hours at the
new room temperature before using it.

Using the TEAC Global Site

You can download this Owner's Manual necessary
for this unit from the TEAC Global Site (http://
teac-global.com/).
Open the TEAC Global Site (http://teac-global.
1.
com/).
In the TASCAM Downloads section, click the
2.
desired language to open the Downloads
website page for that language.
NOTE
If the desired language does not appear, click
Other Languages.
Click the product name in the "Search by Model
3.
Name" section to open the Downloads page for
that product.
Select and download the Owner's Manual that
4.
are needed.

User registration

Customers in the USA, please visit the TASCAM
website (http://tascam.com/) to register as a user
online.