Use; Mode Selection: Roller Or Tilting Mode; My Position - SOMFY Sonesse 30 RTS Guia De Instalacion

6. USE

6.1. Mode selection: Roller or Tilting mode

By factory default, the motor is in Roller mode, but you can change from one mode to another.
Move the shade away from the end limits.
1) Press the UP and DOWN buttons, until the shade
makes an Up and Down movement.
2) Press and hold the My and DOWN buttons
simultaneously, until the shade makes an Up and Down
movement, to change from Roller mode to Tilting mode.

6.2. My position

1) Recording My position.
To set the My position, move the shade to the desired
position with the UP and DOWN buttons, then press
the My button, until the shade makes an Up and Down
movement.
2) Changing the My position
To change the My position, go to the new desired My
position with the UP and DOWN buttons, then press
the My button, until the shade makes an Up and Down
movement.
3) Delete the My position
To delete the My position, move to this position and
press the My button, until the shade makes an Up and
Down movement.
Copyright © 2013-2016 Somfy SAS. All rights reserved
1
2
1
2
3
7