Section !1. Getting Ready To Sew; Connecting Machine To Power Supply; For Your Safety; Operating Instructions - Sears Kenmore 385.12618 Manual De Instrucciones

SECTION il. GETTING READY TO SEW
Connecting Machine to Power Supply
(_ Power supply plug (_)Power switch
(_) Outlet (_) Machine socket
(_) Machine plug (_)Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power,
1oTurn off the power switch (_)
_r
2_ Insert the machine plug (_) into the machine socket (_).
3. Insert the power supply plug 0 into the outlet (_),
4. Turn the power switch(_)to turn on the power and
sewing light (_).
For Your Safety
* While in operation, always keep your eyes on the sewing
area Do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
*Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended_
- When attaching or removing any parts
- When cleaning the machine_
* Do not place anything on the foot control, when not sewing.
®
OFF ON
Operating Instructions:
"For appliances with a polarized plug (one blade wider than the
other)..To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way., If it does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the power outlet, Do not modify the plug in
any way,,"
"Foot Controller Model YC-482P is used with Sewing Machine
Model 385,12618XXX." XXX - represents numbers 000 through
999.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
f
_J