Publicidad
Dr. Groove
Modelo: DR-202
1. TRANSMITTED DATA
Channel Voice Message
Note Off
Status
2nd byte
3rd byte
9nH
kkH
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
kk=Note number :
00H-7FH (0-127)
Note on
Status
2nd byte
3rd byte
9nH
kkH
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
kk=Note number:
00H-7FH (0-127)
vv=Velocity :
01H-7FH (1-127)
Pad
Note Number
KICK 1
36 (24H)
KICK 2
35 (23H)
SNARE 1
38 (26H)
SNARE 2
40 (28H)
CLOSED HH
42 (2AH)
OPEN HH
46 (2EH)
HIT 1
50 (32H)
RIDE
51 (33H)
HIT 2
47 (2FH)
CRASH
49 (31H)
HIT 3
43 (2BH)
PERC 1
60 (3CH)
PERC 2
61 (3DH)
Control Change
Bank Select
This message is transmitted when the "MIDI Program change switch" of the MIDI mode
is set at ON.
Status
2nd byte
3rd byte
BnH
00H
mmH
BnH
20H
llH
n=MIDI channel :
0H-FH(ch.1-ch.16)
mm=Bank number (MSB) : 00H-7FH (0-127)
ll=Bank number (LSB) :
00H-7FH (0-127)
* Channel number is transmitted over the channel set in the Drum part.
* The Drum kit corresponding to each Bank Select are as follows.
* Bank number (LSB) is always transmitted in 00H.
Bank Select
Progaram No
MSB
LSB
81
00
0 - 127
85
00
0 - 63
Volume
This message is transmitted when the "MIDI Volume switch" of the MIDI mode is set at ON.
Status
2nd byte
3rd byte
BnH
07H
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Volume :
00H-7FH (0-127)
* Transmitted when the "MIDI Volume" is changed in the MIDI mode.
Portamento
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
41H
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Control value :
00H-7FH (0-127)
0-63=OFF 64-127=ON
Portamento time
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
05H
vvH
80
MIDI Implementado
Pad
Note Number
ROLL KICK 1
100 (64H)
ROLL KICK 2
101 (65H)
ROLL SNARE 1
102 (66H)
ROLL SNARE 2
103 (67H)
ROLL CLOSED HH 104 (68H)
ROLL OPEN HH
105 (69H)
ROLL HIT 1
106 (6AH)
ROLL RIDE
107 (6BH)
ROLL HIT 2
108 (6CH)
ROLL CRASH
109 (6DH)
ROLL HIT 3
110 (6EH)
ROLL PERC 1
111 (6FH)
ROLL PERC 2
112 (70H)
Drum Kit
Preset 0-127
User 0-63
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Portamento time :
00H-7FH (0-127)
Effect1 (Reverb Level / Delay Feedback)
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
5BH
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Control value:
00H-7FH (0-127)
* Channel number is transmitted over the channel set in the Drum part.
Effect3 (Flanger Level)
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
5DH
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Control value :
00H-7FH (0-127)
* Channel number is transmitted over the channel set in the Drum part.
Data Entry
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
06H
mmH
n=MIDI channel :
0H-FH(ch.1-ch.16)
mm=MSB value of the parameter specified by NRPN
Roll Type
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
12H
ppH
n=MIDI channel :
0H-FH (ch.1-ch.16)
pp=Roll type number :
00H-38H (0-67)
* Transmitted on the MIDI channel set in the Drum part.
* Transmitted in one of the following operations:
When the Pattern is selected.
When the "Type" is changed in the Roll mode.
Roll Speed
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
13H
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Roll speed :
00H-7FH (0-127)
* Transmitted on the MIDI channel set in the Drum part.
* Transmitted in one of the following operations:
When the Pattern is selected.
When the "Speed" is changed in the Roll mode.
NRPN MSB/LSB
This message is transmitted when the "MIDI Control change switch" of the MIDI mode is
set at ON.
Status
2nd byte
3rd byte
BnH
63H
mmH
BnH
62H
llH
n=MIDI channel :
0H-FH (ch.1-ch.16)
mm=MSB of parameter specified by NRPN
ll=LSB of parameter specified by NRPN
**NRPN**
Control change has an extension field called NRPN (non registered parameter number) in
which device-specific function can be defined.
The NRPN can be set without restriction on manufacturer or model. This means that the
same parameter number can be assigned different functions by some manufacturers.
Therefore, the device which receives this message may not operate as expected.
Fecha: 1/6/98
Versión: 1.00
Publicidad
Capítulos
