MIDI Implementado
Channel Mode Message
All Sound Off
Status
2nd byte
3rd byte
BnH
78H
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
* All current active voice in the specified channel will be shut off.
Reset All Controllers
Status
2nd byte
3rd byte
BnH
79H
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
* The following control values on the specified channel return to the default value.
Controller
Default Value
Pitch Bend Change
±0
Hold1
0 (off)
Modulation
0 (min)
Expression
127 (max)
RPN/NRPN
No specified parameter / No change in value
All Note Off
Status
2nd byte
3rd byte
BnH
7BH
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
* All active voices on the specified channel are turned off. (Each voice responds as to a
"Note Off.") If Hold1 is ON, this message does not become effective until Hold is OFF.
Drum track ignores this message.
OMNI OFF
Status
2nd byte
3rd byte
BnH
7CH
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
* OMNI OFF is only recognized as "All Notes Off."
MONO
Status
2nd byte
3rd byte
BnH
7EH
mmH
n=MIDI channel :
0H-FH (ch.1-ch.16)
mm=Number od mono :
00H-10H (0-16)
* MONO is only recognized as "All Notes Off."
* Current mode does not change.
POLY
Status
2nd byte
3rd byte
BnH
7FH
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
* POLY is only recognized as "All Notes Off."
* Current mode does not change.
84
System Exclusive Message
Status
Data byte
Status
F0H
iiH, ddH, ..., eeH
F7H
F0H :
System Exclusive
ii=ID number :
41=Roland
7E=Universal Non-Realtime Message
7F=Universal Realtime Message
dd, ..., ee=Data:
00H-7FH (0-127)
F7H :
EOX (End Of Exclusive)
* With the DR-202, the System Exclusive Messages can be used to transmit Bulk Dump
of Kit data, Song/Pattern data and MIDI/Utility data.
For details refer to "4. Exclusive Communications," on page 85.
System Common Message
Recognized only when the DR-202 is in stop and "Sync" of the MIDI mode is set at MIDI.
Song Position Pointer
Status
2nd byte
3rd byte
F2H
llH
mmH
mm, ll =Value :
00H, 00H-7F, 7FH (0-16383)
* If the DR-202 receive Song Position Pointer in Song mode, it calls the position in the
song.
Song select
Status
2nd
byte
F3H
ssH
ss=Song number :
00H-12H (0-18)
* When received in Song mode, it changes the songs.
System Realtime Message
Timing Clock
Status
F8H
* This message is ignored when the "Sync mode" of the MIDI mode is set at INT or
REMOTE.
Start
Status
FAH
* This message is ignored when the "Sync mode" of the MIDI mode is set at INT.
Continue
Status
FBH
* This message is ignored when the "Sync mode" of the MIDI mode is set at INT.
Stop
Status
FCH
* This message is ignored when the "Sync mode" of the MIDI mode is set at INT.