Publicidad
Active Sensing
Status
FEH
* Whenever the DR-202 receives this message, it monitors the interval of the incoming data.
If the subsequent message has not arrived within about 420 ms after the previous data, it
processes all tracks as though it has received All Sound Off, All Notes Off, Reset All
Controllers, and mutes the sounding voices, then stops monitiring receiving interval.
3. Messages stored during Realtime recor-
ding of patterns
Channel Voice Message
Note Off
Status
2nd byte
3rd byte
9nH
kkH
00H
n=MIDI channel :
0H-FH (ch.1-ch.16)
kk=Note number :
00H-7FH (0-127)
Note on
Status
2nd byte
3rd byte
9nH
kkH
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
kk=Note number :
00H-7FH (0-127)
vv=Velocity :
01H-7FH (1-127)
Control Change
Portamento
Recording is disabled if MIDI Control change switch of MIDI mode is set at OFF.
Status
2nd byte
3rd byte
BnH
41H
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Control value :
00H-7FH (0-127)
0-63=OFF 64-127=ON
Portamento Time
Recording is disabled if MIDI Control change switch of MIDI mode is set at OFF.
Status
2nd byte
3rd byte
BnH
05H
vvH
n=MIDI channel :
0H-FH (ch.1-ch.16)
vv=Portamento time :
00H-7FH (0-127)
Data Entry
Recording is disabled if MIDI Control change switch of MIDI mode is set at OFF.
Status
2nd byte
3rd byte
BnH
06H
mmH
n=MIDI channel :
0H-FH(ch.1-ch.16)
mm=MSB value of the parameter specified by NRPN
**NRPN**
Tone Modify
NRPN
Data Entry
MSB
LSB
01H
20H
mmH
TVF Cutoff Frequency
mm: 0EH-40H-72H (-50 - 0 - +50)
01H
21H
mmH
TVF Resonance
mm:0EH-40H-72H (-50 - 0 - +50)
01H
64H
mmH
TVF & TVA Envelope Decay Time
mm: 0EH-40H-72H (-50 - 0 - +50)
15H
rrH
mmH
Drum Instrument TVF Cutoff Frequency
rr: Note number of Drum Instrument
mm: 0EH-40H-72H (-50 - 0 - +50)
16H
rrH
mmH
Drum Instrument TVF Resonance
rr: Note number of Drum Instrument
mm: 0EH-40H-72H (-50 - 0 - +50)
17H
rrH
mmH
Drum Instrument TVF & TVA Envelope Decay Time
rr: Note number of Drum Instrument
mm: 0EH-40H-72H (-50 - 0 - +50)
4. Exclusive Communications
General
DR-202 can do one-way communications to send and receive parameters for kits, system
setup, sequence, user chord.
Model ID included in the exclusive message should be 00H 13H. The device ID code
should be System Exclusive Device ID of MIDI parameter. Note that the actual value that
set in device ID field is smaller by one than the value set System Exclusive Device ID of
MIDI parameter.
Universal Non-Realtime System Exclusive Message
Inquiry Request
Status
data byte
Status
F0H
7EH, dev, 06H, 01H
F7H
Byte
Description
F0H
Exclusive Status
7EH
ID Number (Universal Non-Realtime Message)
dev
Device ID (dev: 10H(17)-1FH(32))
06H
Sub ID#1 (General Informarion)
01H
Sub ID#2 (Inquiry Request)
F7H
EOX (End of Exclusive)
* The "dev" is own device number or 7FH (Broadcast).
* When Inquiry Request is received, Inquiry Reply message will be transmitted.
Inquiry Reply
Status
Data byte
Status
F0H
7EH, dev, 06H, 02H,
F7H
41H, 01H, 13H, 00H,
00H,00H, 03H, 00H, 00H
Byte
Description
F0H
Exclusive Status
7EH
ID Number (Universal Non-Realtime Message)
dev
Device ID (dev: 10H(17)-1FH(32))
06H
Sub ID#1 (General Informarion)
02H
Sub ID#2 (Inquiry Reply)
41H
Manufacturer ID (Roland)
01H, 13H
Device Family Code
00H, 00H
Device Family Number Code
00H, 03H, 00H, 00H
Software Revision Level
F7H
EOX (End of Exclusive)
* Reply the message by the unique device ID (dev) when the device has received the
"Inquiry Request Message" in the Broadcast.
MIDI Implementado
85
Publicidad
Capítulos
