Cleaning The Fan On The Left-Hand Side Of The Enclosure - SMA SUNNY TRIPOWER Serie Instrucciones De Instalación

10 Troubleshooting
• Clean the fan guard with a soft brush, a paint brush, a cloth or compressed air.
4. Press the locking tabs on the fan toward the
center of the fan.
5. Carefully remove the fan from the inverter.
6. Release and remove the fan plug.
7.
Damage to the fan due to compressed air
• Clean the fan only with a soft brush, a paint brush, or a damp cloth.
8. After cleaning, insert the fan plug back into the
pin connector until it snaps into place.
9. Insert the fan into the inverter until it snaps into place.
10. Push the fan guard into the retainer until it snaps into place.
11. Clean the fan on the left-hand side of the enclosure (see Section 10.3.2 "Cleaning the Fan on
the Left-Hand Side of the Enclosure", page 52).

10.3.2 Cleaning the Fan on the Left-Hand Side of the Enclosure

1.
Danger to life due to electric shock
• Ensure that the inverter is disconnected from all voltage sources (see Section 9
"Disconnecting the Inverter from Voltage Sources", page 39).
52 STPTL-US-10-IA-xx-17
SMA Solar Technology America LLC
Installation Manual