Troubleshooting; Scrapping - Nilfisk-Advance Micromax 17E Instrucciones De Uso

INSTRUCTIONS FOR USE

TROUBLESHOOTING

TROUBLE
Motors do not work
Insufficient dirty water vacuum
Insufficient solution flow to the
brush
Scoring caused by the
squeegee
For further information consult the Service Manual at the
Advance Service Center.
10
CAUSE
Incorrectly connected electrical
supply plug (22, Fig. C)
Full recovery tank (5, Fig. H)
Clogged vacuum grid (1, Fig. E) or
stuck closed float
Hose (25, Fig. C) disconnected
from the squeegee
Dirty squeegee or worn/damaged
squeegee blades (13 and 14, Fig.
C)
Incorrectly closed tank cover, or
damaged gasket (7, Fig. E) or
clogged compensation hole (11,
Fig. E)
Dirty solution filter (2, Fig. F)
Dirty tank (7, Fig. H) (clogged
output hole)
Debris under the squeegee blades
(13 and 14, Fig. C)
Worn, chipped or torn squeegee
blades (13 and 14, Fig. C)
Squeegee not balanced by means
of the knob (12, Fig. C)

SCRAPPING

Have the machine scrapped by a qualified scrapper.
Before scrapping the machine, remove the following
components:
– Brush
– Pad
– Electrical motors
CAUTION!
The removed components must be disposed of
properly according to the Law in force.
Micromax™ 17E — 909 5473 000(2)2005-04