Selecting Print Option (Aprt); Setting The Time (Time) - Seca 645 Manual De Instrucciones Y Garantía

Selecting print option

Setting the time (tIME)

4. If you do not wish to make any more settings, press
the Start key.
The settings will be saved.
The device switches off.
You can configure the device so that the measurement
results are automatically printed out on a wireless
(APrt)
printer registered to the wireless group.
NOTE
This function is only accessible if a
seca wireless printer has been integrated in the
wireless group via the "Learn" function.
1. Switch on the device.
2. Select the "APrt" menu item from the "rF" submenu
and confirm your selection.
3. Select the setting relevant for your device
combination:
– HI: measurement results from length
– MA: measurement results from scales
– HI_MA: measurement results from length
– Off: no automatic printing, printing only pos-
4. Confirm your selection.
You exit the menu automatically.
5. If you do not wish to make any more settings, press
the Start key.
The settings will be saved.
The device switches off.
You can configure the system so that the wireless
printer automatically adds a date and time to your
measurement results. To do this, you have to set date
and time once on this device and transmit it to the
internal clock of the wireless printer.
NOTE
This function is only accessible if a
seca wireless printer has been integrated in the
wireless group via the "Learn" function.
1. Switch on the device.
measuring devices
measuring devices and scales
sible by pressing and holding the Enter key
during the weighing procedure.
The seca 360° wireless network • 105
English