Checking The Content Of The Verification Counter - Seca 645 Manual De Instrucciones Y Garantía

10.2 Checking the content of the verification counter

Verification is necessary whenever one or more verifica-
tion seals are damaged or the contents of the verifica-
tion counter no longer match the number on the
applicable verification counter sticker. If verification
seals are damaged, contact seca Service directly.
This seca scale is verified. Verifications may only be
performed by authorized agencies. To guarantee this,
the scale is equipped with a verification counter to
record any change in verification-related data.
If you want to check whether the scale has been pro-
perly verified, proceed as follows:
1. If necessary, turn off the scale.
2. Press and hold any key and start the scale.
The current content of the verification counter flas-
hes in the display for a few seconds.
3. Compare the content of the verification counter
output with the number given on the verification
counter sticker.
2
Both numbers have to match for the verification to be
checksum
valid. If the sticker and the verification counter do not
match, the scale must be verified. Please contact your
service partner or seca Service. Once the scale has
been verified, a new, updated verification counter sticker
is used to identify the status of the verification counter.
The person authorized to perform the verification secu-
res this sticker with an additional seal. The verification
counter sticker can be ordered from seca Service.
Servicing/Verification • 111
English