Troubleshooting; Service Information - OHAUS Aviator 2000 Serie Manual De Instrucciones

Aviator™ 2000 Series
3.2 How to store unit price
After switching on the scale, press the [Enter] key. Weight reading display window
shows "SET", unit price display window shows "- - - - -". Press one of the unit price
keys [MX], the weight reading display window now shows "SET-X". The unit price
display window shows the unit price already set before. Press the digit keys to input
the desired unit price, and then press [Enter] to finish.
Example:
1) Switch on the scale:
2) Press the [Enter] key:
3) Press the [M1] key and set 2.50 as the price:
4) Press the [Enter] key to store the unit price.
4 MAINTENANCE
4.1 Cleaning
The housing may be cleaned with a cloth dampened with a mild detergent if
necessary. Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean
the housing or control panels.

4.2 Troubleshooting

The following table lists common problems and possible causes and remedies.
If the problem persists, contact OHAUS or your authorized dealer.
Symptom
Cannot turn on
Poor accuracy
Err
-----
Lo
Battery fails to charge fully Battery is defective

4.3 Service Information

If the troubleshooting section does not resolve or describe your problem, contact
your authorized OHAUS service agent. Please visit our web site, www.ohaus.com
to locate the OHAUS office nearest you.
TABLE 4-1
Possible Cause
No power to scale
Unstable environment
System parameter fault
Overload
Battery is discharged
Remedy
Verify connections and power
source
Move scale to suitable location
Contact an authorized service agent
Make sure load is within the scale's
maximum capacity.
Connect the power and charge the
battery
Have battery replaced by OHAUS
authorized service dealer.
EN-3