Canon imageRUNNER 2202N Guida Rapida página 22

IMPORTANT
You cannot use the machine as a repeater, bridge, or
gateway.
NOTE
• The machine can automatically detect the Ethernet
speed (10Base-T or 100Base-TX).
• If you are using a mixed 10Base-T/100Base-TX
environment, devices on the network (hubs, routers,
etc.) must support the mixed environment. For
more information, consult your local authorized
Canon dealer.
• After connecting the network cable, perform the
following operations. (For more information, see the
relevant descriptions.)
- Set the System Management Settings. (See
e-Manual > Security.)
- Set the network settings. (See e-Manual >
Network.)
- Install the printer driver if necessary. (See the
e-Manual.)
18
Setting Up the Connection