Erreka MAGIC Manual Del Instalador página 58

INSTALLATION
Position the base of the profile
Position the upper profile support
54
Installation Manual
1 Position the base of the profile (1) on the base plate
(2).
2 Position in the frame (3) on the base of the profile
(1), ensuring that the drag wheel (4) of the operator
fits correctly on the pin (5) of the base plate.
3 Attach the base of the profile (1) to the frame of the
door (3) using the screws (6).
1 With the seal (T) correctly positioned, fix the upper
support of the profile (1) to the frame of the door (2)
using the screws (3).

The frame in iron doors has a rim. Check the
position of the rim in order to correctly position the
upper profile support (the groove of the support
should coincide with the rim of the frame).
2 Check that the two O-ring seals (4) are positioned
on the pin (5).
3 Position the upper pin equipment (5).
T
4 Gland adjustment (6).
P249H