Erreka MAGIC Manual Del Instalador página 61

EPS1 card brake connection

If the operator to be installed has a brake, the EPS1 plate must be used to connect
it to the VIVO-M203 board, carrying out the connections indicated below.
A1, A2: operators
FR1
FR2
FR1 connections (A1 brake)
If the operator DOES NOT have an encoder:
COM white wire
L1 red wire
If the operator HAS an encoder:
COM orange wire
L1 purple wire
Fig. 6 EPS1 plate brake connection
M203: 230V/50Hz
COM
L1
L2
DL1 Red LED, FR1 activation
DL2 Green LED, FR2 activation
F1
EPS1
VIVO-M203
FR2 connections (A2 brake)
If the operator DOES NOT have an encoder:
COM white wire
L2 red wire
If the operator HAS an encoder:
COM orange wire
L2 purple wire
MAGIC built-in electromechanical operator
INSTALLATION
P249Y
57