9.0 maintenance and care
safety check
As the user you will be the first person to notice any
possible defects. We therefore recommend that before
each use, you check the following:
that the tyre pressure is correct.
that the brakes work correctly.
that all removable parts are securely fastened (e.g.
armrests, footrest hangers, quick-release axles ...).
if there is any damage/defect, please contact your
authorised dealer.
maintenance
Check the tyre pressure at regular intervals.
Check all tyres for wear and damage at regular intervals,
at least annually. Change the tyres as soon as there is
any sign of damage or wear.
Check the seat and back sling for wear and damage at
regular intervals, at least annually. Change these items
as soon as there is any sign of damage or wear.
Check all frame and backrest components for wear and
damage at regular intervals, at least annually. Change
these items as soon as there is any sign of damage or
wear.
Check the brakes for wear and damage at regular
intervals, at least annually. Check that they are working
properly and are easy to use. Change the brakes as soon
as there is any sign of damage or wear.
Check to make sure all bolts are secure (see the section
on torque) at regular intervals, at least annually. All
screws which are critical to using the wheelchair safely
have safety nuts. Safety nuts should only be used once
and should be replaced after use.
note:
If torque settings are given, then we strongly recommend
that you use a torque measuring device, in order to check
that you have tightened to the correct torque.
Please use only mild household cleaners when your
wheelchair is dirty. Use only soap and water when
cleaning the seat upholstery and lap belt.
Depending on the frequency and type of use, we
recommend taking your wheelchair to your authorised
dealer regularly, but at least within a year, to have it
maintained by trained personnel.
cautIon!
Sand, salt and sea water can damage the bearings of
the front and rear wheels. Clean and dry the wheelchair
carefully, after they have been exposed to these
elements.
Hygiene when being reused:
When the chair is to be reused, it should be prepared
carefully, and be wiped and treated with spray
disinfectant on all surfaces which could come into contact
with the user.
If you need to do this quickly, you must use a liquid,
alcohol-based disinfectant suitable for medical products
and devices.
Please pay attention to the manufacturer's instructions of
the disinfectant you are using.
In general, a safe disinfectant cannot be guaranteed
on seams. We therefore recommend that you
properly dispose of seat and back slings in the case
of microbacterial contamination with active agents
according to §6 infection protection law.
storage:
The wheelchair should always be stored in a dry place.
22
YOUNGSTER 3
10.0 disposal / recycling of materials
If the wheelchair has been made available to you free of
charge, then it does not belong to you. If it is no longer
required, then follow the instructions to return it as given
by the organisation that made the wheelchair available to
you.
In the following section, there is a description of the
materials used on the wheelchair, in view of the disposal
or recycling of the wheelchair and its packaging.
Particular regulations with regard to disposal or recycling
may be in force locally and these must be taken into
account when performing disposal. (This can include the
cleaning or decontamination of the wheelchair prior to
disposal).
aluminium: Castor forks, wheels, sideguards for the
chassis, armrest frame, footrest, push handles
steel: Fixing points, quick-release axle
plastic: Handles, tube stoppers, castors, footplates,
armpads and 12" wheel/tyre
packaging: Plastic bags made of soft polyethylene,
cardboard
upholstery: Woven polyester with PVC coatings and
expanded combustion modified foam.
Disposal or recycling should be carried out by a disposal
company or at a public disposal point. You can also return
your wheelchair to your dealer for disposal.