Best CP55IQ Manual De Uso página 8

7. REMOVE BOTTOM PANEL
Using a Phillips screwdriver, remove both bottom panel retaining
screws and set aside.
R
ETAINING SCREW LOCATIONS
HO0224
8. REMOVE KNOCK-OUT OPENING (CP55IQ
From inside the power pack, remove the wiring box cover by removing 2 retaining screws and
set aside. Punch out the electrical knockout hole on top of the power pack. Install the wire clamp
(included in parts bag).
9. INSTALL THE 8" ADAPTER/DAMPER (CP55IQ S
Using 4 no. 8 x 3/8" screws from parts bag, assemble the adapter/damper on the top of the power pack. To ensure proper opening of the
dampers, remove shipping tape if present. Seal all joints with metal foil duct tape to eliminate air leaks.
Disassemble bottom panel from power pack and set aside.
HO0120
CP57IQT S
AND
ERIES ONLY
8
S
IDE VIEW
)
ERIES ONLY
HR0027
)
M
OUNTING SCREW LOCATIONS
HJ0016