Ec Declaration Of Conformity; Definitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt XR DCP580 Traducido De Las Instrucciones Originales

Charger
Mains voltage V
AC
Battery type
Approx. charging time min 60 (1.3 Ah) 70 (1.5 Ah) 90 (2.0 Ah)
of battery packs
140 (3.0 Ah) 185 (4.0 Ah) 240 (5.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min 40 (1.3 Ah) 45 (1.5 Ah) 60 (2.0 Ah)
of battery packs
90 (3.0 Ah) 120 (4.0 Ah) 150 (5.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min 30 (1.3 Ah) 35 (1.5 Ah) 50 (2.0 Ah)
of battery packs
70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min 22 (1.3 Ah) 22 (1.5 Ah) 30 (2.0 Ah)
of battery packs
45 (3.0 Ah) 60 (4.0 Ah) 75 (5.0 Ah)
Weight kg
Fuses:
Europe 230V tools
U.K. & Ireland 230V tools

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
DCB107
230
10.8/14.4/18 Li-Ion
EC-Declaration of Conformity
0.29
MACHINERY DIRECTIVE
DCB112
230
10.8/14.4/18 Li-Ion
HAND PLANER
DCP580
D
0.36
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
DCB113
EN60745-2-14:2009+A2:2010.
230
These products also comply with Directive
10.8/14.4/18 Li-Ion 2004/108/EC (until 19.04.2016), 2014/30/EU (from
20.04.2016) and 2011/65/EU. For more information,
please contact D
refer to the back of the manual.
0.4
The undersigned is responsible for compilation of
the technical file and makes this declaration on
DCB115
behalf of D
230
10.8/14.4/18 Li-Ion
Markus Rompel
0.5
Director Engineering
D
D-65510, Idstein, Germany
10 Amperes. mains
15.02.2016
3 Amperes. in plugs

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
Denotes risk of electric shock.
Denotes risk of fire.
WALT declares that these products described
e
WALT at the following address or
e
WALT.
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Keep work area clean and well lit.
a)
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
b)
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
english
31